Pyramid Apex 7401-UB3 Bill Acceptor (110V, Coinco Bezel)
Wall-powered Apex with a Coinco-style faceplate for $1 to $20 notes.
The 7401-UB3 is the Apex to reach for when a machine runs on 110 to 120 volts AC and its door was cut for a Coinco validator. Power comes straight from the line, so no separate 12V supply is needed, and the Coinco-style faceplate lets it go in without reworking the panel. It reads $1, $5, $10 and $20 notes in any of four orientations and reports to the host over pulse or serial. Accepted bills go up into a 500-note plastic cassette (the U and B in Pyramid's part code), and dual-stage optical anti-stringing guards against fished notes. Calibration is automatic, settings are made with DIP switches or a PC, and firmware can be flashed when updates come out.
Key features
- Accepts US $1, $5, $10 and $20 notes (7400 series)
- Internal 110VAC power supply — plugs into wall power, no transformer needed
- Coinco-style bezel — drop-in fit for cabinets cut for Coinco validators
- 500-note non-locking stacker included
- Bill acceptance rate greater than 95%; processes up to 20 bills per minute
- Dual-stage optical anti-stringing technology with enhanced magnetic sensing
- Automatic self-calibration — no manual adjustment required
- DIP-switch and PC configuration; flash firmware updates via PRO-2, BluStream or USB cable
- Made in the USA — designed for 20+ years of field reliability
Specifications
| Model / SKU | 7401-UB3 |
|---|---|
| Denominations | $1 – $20 (USD) |
| Power / interface | 110VAC (internal power supply) |
| Bezel | Coinco-style bezel |
| Acceptance rate | Greater than 95% |
| Speed | Up to 20 bills per minute |
| Maximum bill width | 72mm |
| Stacker | 500-note non-locking stacker |
| Security | Dual-stage optical anti-stringing + enhanced magnetic sensing |
| Calibration | Automatic self-calibration |
| Configuration | DIP switches, PC flash updates, PRO-2 or BluStream |
| Origin | Made in the USA |
Installation & setup notes
Order the 7401-UB3 for a 110V cabinet whose door is already cut for a Coinco validator, such as a bill changer or a standalone kiosk.
The UB3 chassis carries its own 110VAC supply, so it connects straight to wall power in equipment that has no 12V rail — laundromat changers, standalone kiosks and older amusement cabinets. Output to the host controller is pulse or serial, selected with DIP switches.
The Coinco-style faceplate matches the opening left by Coinco BA30/BA50-series and similar validators, so a swap needs no panel modification.
Not sure this is the right Apex?
The Apex 7000 family shares one validator platform; models differ by power/interface, bezel and denominations. The 7401-UB3 is the 110VAC (internal power supply) / Coinco-style bezel / $1 – $20 (USD) configuration. Closest alternatives:
- Need Standard Pyramid bezel instead (bezel)? Choose the Apex 7400-UB3.
- Need 12VDC instead (power / interface)? Choose the Apex 7401-UB1.
- Need 24V MDB instead (power / interface)? Choose the Apex 7401-UB4.
- Need VFM-style bezel instead (bezel)? Choose the Apex 7402-UB3.
Manuals & setup documentation
- Apex 7000 Series User Manual (UL)Full installation, DIP-switch and operation manual · PDF
- Apex 7000 Brochure (Rev D)Series overview and options · PDF
- Apex Configuration CardsPrintable coupon-style configuration cards · PDF
- Apex Connections & PinoutsHarness and connector reference · PDF
- Apex RS-232 Interface ManualSerial protocol reference for integrators · PDF
- Apex 7000 cleaning instructionspyramidacceptors.com
- Acceptor Tools setup instructions (PC configuration)pyramidacceptors.com
- Pyramid software downloads (Acceptor Tools, firmware)pyramidacceptors.com
Related products
All products
Apex 7400-UB3 Bill Acceptor
110VAC-powered Apex for equipment with wall power — no external supply needed.
Apex 7401-UB1 Bill Acceptor (Coinco Bezel)
12VDC Apex with Coinco-style bezel for drop-in Coinco replacements.
Apex 7401-UB4 Bill Acceptor (MDB, Coinco Bezel)
24V MDB Apex with Coinco-style bezel for MDB vending machines.